Description
- Supports 4K @ 30Hz resolution, FULL HD 1080p up to 150m
- The HDMI extender consists of a TX transmitter and an RX receiver
- Transmitter and receiver input and output connectors: HDMI female
- Transmitter and receiver connectors: RJ45 female
- A high-quality 1x LAN cable Cat5e, Cat6 or Cat7 is used to connect TX and RX
- 3×3.4 Gbps transfer rate including HDCP support
- Bandwidth: 340MHz
- For resolutions: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 4K @ 30Hz
- The extender transmits HDMI digital video and audio
- The extender must not connect to an active computer network, switch, router, or other active network device. The transmitter and receiver of the extender must be directly connected by a LAN cable, preferably without interruption.
- HDMI input and output cables can be up to 10m long with AWG of these AWG26 cables (AWG26 applies to 7m and 10m cables)
- The transmitter and receiver are powered by the included power adapters 230V/5V, 1A
- The units contain a practical EDID button, after holding the EDID button for a long time, the resolution switches from FULL HD 1080p to 4K @ 30Hz and vice versa
- The transmitter and receiver have signaling LEDs that indicate when the units have connected and signal transmission is in progress.
- The blue LED indicates the power status, during operation this LED flashes red and indicates an active HDMI signal.
- Working temperature: -15 to + 55 ° C
- Dimensions of transmitter and receiver: 81mm x 47mm x 22mm
- Transmitter weight: 102g
- Receiver weight: 103g
Reviews
There are no reviews yet.